Tooled to the curvature of the Mate X6’s 6.45-inch 3D quad-curved outer screen and formed by high-temperature 3D hot bending, with full-surface AB adhesive across the whole panel — the answer to cheap edge-adhesive films that leave a suspended middle, white edges and unreliable touch. Coverage is ≥97% with a black border of ≤1.8 mm, and side-mounted fingerprint unlock still works. Outer screen only — not for the internal folding display.
Key Features
1. Made Exclusively for the Outer Screen, Tooled to the Mate X6’s Quad-Curved Panel
Tooled precisely to the curvature of the Mate X6’s 6.45-inch 3D quad-curved outer screen; 3D high-temperature hot bending brings the glass edge into line with the curvature on all four sides. Screen coverage ≥97% with a black border of ≤1.8 mm, controlled so it never covers usable display area.
2. True Full-Adhesive Bonding — No White Edges
An alternative to cheap edge-adhesive films, which only have adhesive around the perimeter and leave the middle suspended, causing touch dropouts and white patches. AB adhesive is applied across the whole panel, filling every gap between the curved glass and the outer screen — no white edges, no rainbow tint, no light leaking at the black border. Touch stays as responsive as bare glass, swiping doesn’t stutter and typing doesn’t mis-trigger.
3. Side Fingerprint Compatible — Unlock in a Beat
Adapted specifically for the Mate X6’s side-mounted fingerprint reader: adhesive thickness and transmittance are tuned so the sensor still unlocks instantly after application (we recommend re-registering your fingerprint once after applying, for the best result). The display area stays fully clear.
4. Concealed Edge, HD — True Flagship Colour
A high-alumina silicate substrate with transmittance of at least 90%. The ≤1.8 mm black border aligns precisely with the outer screen’s border — no white edge, and no loss of usable display. 9H hardness resists scratches and shattering, so everyday grit and keys leave no marks.
5. Electroplated Oleophobic Coating + Dust-Free Quick-Apply
A vacuum-electroplated oleophobic coating with a high water contact angle — a flick sends water drops off, and it doesn’t feel rough over time. A dust-free applicator / roller box is included so a first-timer gets it right in one go, without bubbles.
6. Made for the Mate X6 — Tight Fit, No Lifting
Tooled 1:1 to the Mate X6’s 6.45-inch quad-curved outer screen contour, matching all four edges with an even margin — no lifting, no curling, no dust build-up. Since a folding phone is mostly used closed, on the outer screen, full-adhesive bonding is more durable than an edge-adhesive film and far less likely to come off as a whole under temperature change or a light knock.
Specifications
| Brand | HUAWEI |
|---|---|
| Compatibility | Mate X6 (6.45-inch 3D quad-curved outer screen only) |
| Applied to | Outer screen. The inner display is a folding flexible panel and is not suitable for rigid glass film. |
| Material & process | High-alumina silicate glass + 3D high-temperature hot bending |
| Bonding | Full-surface AB adhesive (not edge adhesive) |
| Screen coverage | ≥97% |
| Black border width | ≤1.8 mm (concealed edge, does not cover display) |
| Film thickness | Approx. 0.5 mm (glass 0.2 / 0.33 mm + adhesive 0.2–0.3 mm) |
| Hardness | 9H (scratch resistant, chip resistant) |
| Light transmittance | ≥90% |
| Surface coating | Vacuum-electroplated oleophobic layer (anti-fingerprint, anti-oil) |
| Installation tool | Dust-free applicator / roller box |
| Unlock | Compatible with side-mounted fingerprint recognition |
Installation
1. Dust removal is the key step — the outer screen edge traps dust easily. After cleaning with the alcohol wipe, press the dust-removal sticker repeatedly along the whole perimeter. This is what prevents bubbles.
2. Align before lowering — seat the dust-free applicator / roller box, align with the top and edge locating tabs, then lower the film slowly.
3. Let gravity do the work — allow the film to settle and release air by itself; don’t press hard in the middle. If a few bubbles remain, push them out gently from the centre outwards with the squeegee.
4. Press the edges — where the edge floats slightly, press the curved edge with your fingertip for a few seconds so body warmth helps the adhesive settle. Re-register your fingerprint afterwards for smoother unlocking.
Need a quote, samples or OEM/ODM customization?
We support silk-printed logos, custom color boxes, model-specific tooling and packaging. Send us your requirements — we reply within one business day.
Reviews
There are no reviews yet.