Tooled to the curvature of the Mate 70 Pro’s quad-curved screen and shaped by high-temperature 3D hot bending, this film is laminated across the entire surface with AB full adhesive — which is how it solves the three classic problems of curved-screen films: white edges, black borders and dead touch zones. Once applied, the side-mounted fingerprint reader, 3D face recognition and wireless charging all work as normal, transmittance stays at 90% or above, and the original colour of the screen comes through.
Key Features
1. 3D Hot Bending — the Curve Matches the Mate 70 Pro’s Quad-Curved Screen
High-temperature hot bending gives the glass edge the same generous arc as the quad-curved screen: visually borderless, rounded rather than sharp in the hand, and covering the curved area properly — good to look at and better to touch. Screen coverage reaches 97% or more, with the black border kept to 1.8 mm or less.
2. True Full-Adhesive Bonding — Say No to White Edges
This is not a cheap edge-adhesive film with glue only around the rim and a floating centre, which is what causes dead touch zones, whitening and trapped dust. AB adhesive is applied across the whole surface, filling every gap between the curved glass and the screen, so white edges, rainbow banding and light leaking from the black border simply can’t start. Touch stays as responsive as bare glass — no stutter when swiping, no mis-taps when typing.
3. Side-Mounted Fingerprint and 3D Face Recognition Still Unlock Instantly
The adhesive thickness and transmittance are tuned so that the side-mounted fingerprint reader still unlocks instantly and 3D face recognition is unaffected. The display area stays completely clear — nothing covers the usable screen, and unlocking is as quick as ever.
4. 9H Hardness + HD Clarity — the Original Colour of the Screen
A high-alumina silicate substrate with transmittance of 90% or above, combined with optical anti-reflective treatment, reproduces the screen’s true image — clear rather than grey. 9H hardness resists scratches and shattering, so everyday grit, keys and metal hardware leave no marks.
5. Electroplated Oleophobic Coating — Smooth, Anti-Fingerprint
A vacuum-electroplated oleophobic layer is evenly distributed, with a wide water contact angle: water beads up plump and round and flicks off clean. Gaming feels smooth rather than draggy, and the screen stays fresh even after long use.
6. Made for the Mate 70 Pro — Tight Fit, No Lifting
Tooled 1:1 to the Mate 70 Pro’s screen contour, the film meets the screen edge all the way round with an even margin — no lifting, no curling, no dust build-up over time. The film is tooled for the Mate 70 Pro and also fits the Mate 70 Pro+.
Specifications
| Brand | HUAWEI |
|---|---|
| Compatibility | Mate 70 Pro / Mate 70 Pro+ |
| Material & process | High-alumina silicate glass + 3D high-temperature hot bending |
| Bonding | Full-surface adhesive (AB adhesive, not edge adhesive) |
| Screen coverage | Around 97% or more |
| Black border width | ≤1.8 mm |
| Film thickness | Approx. 0.5 mm (glass 0.2 / 0.33 mm + adhesive 0.2–0.3 mm) |
| Hardness | 9H (scratch resistant, chip resistant) |
| Light transmittance | ≥90% (HD, high clarity) |
| Surface coating | Vacuum-electroplated oleophobic layer (anti-fingerprint, anti-oil) |
| Installation tool | Dust-free applicator / roller box |
| Unlock | Side-mounted fingerprint and 3D face recognition both unaffected |
Installation
1. Dust removal is the key step — the quad-curved edge traps dust easily. After cleaning with the alcohol wipe, press the dust-removal sticker repeatedly along the whole perimeter. This is what prevents bubbles.
2. Align before lowering — with the dust-free applicator / roller box or alignment tool, line up the earpiece and the top edge first, then lower the film slowly.
3. Let gravity release the air — don’t press hard in the middle after lowering; let the adhesive layer release air by itself. If a few bubbles remain, push them out gently from the centre outwards with the squeegee and cloth.
4. Press the edges — where the edge floats slightly, press the curved edge with your fingertip for a few seconds so body warmth helps the adhesive settle.
In Real Use
Need a quote, samples or OEM/ODM customization?
We support silk-printed logos, custom color boxes, model-specific tooling and packaging. Send us your requirements — we reply within one business day.
Reviews
There are no reviews yet.