kmore Anti-Blue-Light Silk-Printed Tempered Glass Film for iPhone

This film puts eye care and true colour into the same piece of glass. A high-alumina silicate substrate is doped with a blue-light absorbing agent and topped with a blue-light filtering adhesive, so the film works on two levels — the substrate absorbs, the adhesive layer reflects — to target 415–455 nm high-energy short-wave blue light, with a blue-light blocking rate of around 92% (measured over 380–450 nm). Unlike the common all-over yellow anti-blue-light film, the centre of this one stays clear and colourless; only a narrow rim at the very edge picks up a faint cool-blue sheen, so the screen keeps its original colour with no yellow cast and no purple shift. A precision silk-printed black border runs along the film’s outer edge, ruling out white halos and light leak, and the earpiece slot is tooled as a shallow stepped cutout from the real device so Face ID stays clear. Made for flat-screen phones generally, shown here on iPhone — just tell us your model when ordering.

Key Features

1. Targeted Anti-Blue-Light — Eye Care Without a Yellow Cast

The blue-light filtering adhesive targets 415–455 nm high-energy short-wave blue light with a blocking rate of around 92% (measured over 380–450 nm), easing the strain of late-night scrolling, streaming and document reading. The important part is that it doesn’t turn yellow. Plenty of anti-blue-light films block light by dyeing the whole sheet, which leaves the screen looking yellow and the colours dull. Ours does targeted filtering on a high-transmittance substrate: the centre of the film stays clear and colourless, white stays white, and photos and video keep their real colour.

2. Silk-Printed Black Border — No White Halo, No Light Leak

A precision silk-printed border follows the outer contour and the rounded corners, covering the adhesive layer completely — so there’s no transparent white halo and no light leaking from the edge. The border is the film’s outer boundary, so once applied it reads as part of the phone’s frame: a cleaner look that also keeps dust out. The edge is finished to 2.5D, so your finger doesn’t catch on it.

3. Electroplated Oleophobic Coating — Wipes Clean

A vacuum-electroplated AF oleophobic coating covers the surface evenly, so fingerprints and oil struggle to cling and wipe away with a single pass. Water beads up without creeping back, marks don’t linger along the edges, and the screen stays smooth and fresh over long use, with a feel close to bare glass.

4. Tool-Free Four-Step Installation — Bubbles Release Themselves

The kit includes wet and dry wipes, a cleaning cloth, dust-removal stickers and a squeegee: wipe, lift the dust, align the film while hovering, then squeegee from the centre outwards. The adhesive layer releases air naturally, so even a first-timer ends up with no bubbles and no dust — no alignment tool, tray or dust-free applicator box needed.

5. Cut 1:1 per Model — Full Coverage of Flat-Screen Phones

The iPhone 12 / 13 / 14 / 15 / 16 series are tooled from the real device: rounded corners and the top earpiece cutout line up exactly with the chassis, without blocking Face ID or interfering with touch and gestures. The product itself is made for flat-screen phones generally; for other brands we can tool from your drawings or photos — just send the model. One eye-care solution, from iPhone to current Android flat-screen models.

6. Real-World Use: Late-Night Eye Care and the Daytime Commute

Scrolling in a dark room and reading in bed at night, then replying to messages and reading documents on the train or metro in the morning — those are the moments when high-energy blue light is most concentrated. With an anti-blue-light glass film the screen stays clear without turning yellow and long sessions feel less tiring. Outdoors and beside a car window it also takes the edge off strong reflections.

Who It’s For

• Long-screen-time users — scrolling at night, streaming on the commute, reading documents at work, eyes easily sore and tired.
• Users who care about screen colour — they want eye care but won’t accept an all-over yellow cast or dull, shifted colours.
• Detail-focused users — who can’t stand a white halo at the edge, exposed adhesive, or fingerprints and oil, and want a film that looks close to invisible.
• First-time installers — who want a bubble-free result in a few minutes without tools.
• Brands and distributors — B2B buyers who need per-model tooling, silk-printed logos, custom color boxes and tool-kit customization.

Specifications

Product name	kmore Anti-Blue-Light Eye-Care Tempered Glass Film
Brand compatibility	Apple iPhone (tooled from the real device; the product suits flat-screen phones generally)
Model coverage	iPhone 12 / 13 / 14 / 15 / 16 series tooled per model; other flat-screen models can be tooled on request
Film type	Silk-printed black-border anti-blue-light tempered glass film
Filtering principle	Substrate absorption + blue-light adhesive reflection (dual structure)
Filtered band	415–455 nm high-energy short-wave blue light
Blue-light blocking rate	Around 92% (measured over 380–450 nm)
Film appearance	Clear and colourless in the centre, faint cool-blue sheen on a narrow outer rim; no yellow cast, no purple shift
Edge finish	Precision silk-printed black border flush with the outer edge + 2.5D rounded edge
Substrate	High-alumina silicate tempered glass
Surface hardness	9H (pencil scale; scratch and shatter resistant)
Thickness	Around 0.3 mm (thin, responsive touch)
Cutout process	Shallow stepped earpiece cutout tooled from the real device; Face ID unaffected
Coating	Vacuum-electroplated AF oleophobic layer (water and fingerprint resistant)
Bonding	Blue-light adhesive laminated across the full surface; resists edge lifting, doesn’t trap dust
Installation tools	Cleaning cloth + dust-removal stickers + wet and dry wipes + squeegee
In the box	Anti-blue-light tempered glass ×1, cleaning kit, dust-removal stickers
MOQ / Lead time	OEM/ODM supported — contact us for MOQ and lead time

Installation Tips (Tool-Free Method)

1. Prepare the environment — turn off fans and air conditioning to reduce floating dust. Wipe oil off the screen with the wet and dry wipes, then dry it with the cloth.

2. Deep dust removal — press the dust-removal sticker repeatedly along the edges and corners. This is the key to a bubble-free result.

3. Line it up — align the rounded corners and the top earpiece cutout, confirm there’s no offset, then lower the film in one motion rather than repositioning it.

4. Press it down — squeegee from the centre outwards at a steady pace. The adhesive layer releases air naturally; give it a few seconds and fine bubbles disappear on their own.

5. Final check — confirm no lifting, no white halo and no bubbles at the corners; push out any remaining fine bubbles from the centre outwards.

6. A note on brightness — the blue-light filtering layer absorbs a small amount of high-energy short-wave blue light, so if the image looks a little dim, simply raise screen brightness.

In Real Use