kmore 3D Curved Full-Glue Tempered Glass for Samsung & Huawei

Made for the curved-screen models from Samsung, Huawei and Honor. High-temperature hot bending gives the glass edge the same arc as the phone’s display, so the curved area is fully covered and the edge feels rounded rather than sharp. Bonding is full-surface adhesive — not edge adhesive — and the adhesive fills every gap between glass and screen, which is what stops white edges and rainbow banding at the source. Adhesive thickness and transmittance are tuned specifically for under-display ultrasonic fingerprint sensors, so unlocking still works first time. The surface carries a vacuum-electroplated oleophobic coating with a water contact angle above 115°; the substrate is high-alumina silicate glass at 9H hardness and 90% or higher transmittance, so the curved display keeps its original image and a bare-glass feel.

Key Features

1. 3D Hot-Bent Curve — Follows Every Line of the Display

High-temperature hot bending gives the glass edge the same curvature as the phone’s screen, covering the curved area completely. Visually it blends into the original display, feels smooth rather than sharp at the edge, and sits tight — good to look at, better to touch.

2. True Full-Adhesive Bonding — Say No to White Edges

This is not a cheap edge-adhesive film with glue only around the rim and a floating centre. Full-surface adhesive is applied across the whole sheet, filling every gap between the curved glass and the screen: white edges and rainbow banding can’t start, touch is as responsive as bare glass, swiping doesn’t stutter and typing doesn’t mis-tap.

3. Ultrasonic Fingerprint Compatible — Unlocks First Time, Film On

Adhesive thickness and transmittance are matched to the under-display ultrasonic sensors used on Samsung and Huawei curved models, so fingerprint enrolment and recognition speed are unaffected and you don’t have to press repeatedly. (We do recommend re-registering your fingerprint once after application for the best result.)

4. Electroplated Oleophobic Coating — Smooth, Anti-Fingerprint

A vacuum-electroplated oleophobic layer is evenly distributed with a water contact angle above 115°: water beads up plump and round and flicks off clean, so the screen stays fresh over long use. Gaming feels smooth rather than draggy, and fingerprints and oil don’t cling — one wipe and they’re gone.

5. 9H Hardness · ≥90% Transmittance — Bare-Screen Look

The high-alumina silicate substrate reaches 9H hardness, so keys, coins and pocket friction leave no marks day to day. Transmittance stays at 90% or above, so the image is clear through the film and colour stays true rather than grey.

6. Full Samsung / Huawei / Honor Curved Range

Covers the curved Galaxy models from Samsung and the Mate / P / Pura curved models from Huawei (quad-curved screens included), tooled precisely per model — the current list is in our tooling catalogue. Models outside the list are welcome too: we can tool to drawings on request, or bring stock in from partner factories.

Who It’s For

• Samsung and Huawei curved-screen owners — Galaxy S series / Note series, Mate series / P series / Pura series and similar, where the curvature is steep and ordinary films struggle to sit properly.
• Detail-focused users — who can’t stand a white edge, a bubble or a black ring after applying a film.
• Users who care about feel — who want a rounded, bare-glass edge after application.
• Users after a seamless look — who want the display to read as one piece of glass, without a white or black ring.

Use Cases

• Heavy everyday use — full-adhesive film is more durable than edge-adhesive film and resists lifting and peeling, so it suits users who keep a film on for the long run.
• Demanding environments — the tight bond holds up through temperature swings and light knocks, where an edge-adhesive film can come off in one piece.
• Users after the best visual result — full-surface bonding makes the display look more like a single sheet of glass.

Compatible Models

The current curved-screen range is below; the list is updated as new models launch, and models outside it are welcome — we can tool on request or source from partner factories.

Samsung Galaxy (from S9)

• Galaxy S9 / S9+ (dual-curved)
• Galaxy Note9 (dual-curved)
• Galaxy S10 / S10+ / S10 5G (dual-curved)
• Galaxy Note10 / Note10+ / Note10+ 5G (curved)
• Galaxy S20 / S20+ / S20 Ultra (curved)
• Galaxy Note 20 Ultra (slightly curved)
• Galaxy S21 Ultra (slightly curved)
• Galaxy S22 Ultra (slightly curved)
• Galaxy S23 Ultra (slightly curved)

Huawei Mate series (from Mate 40)

• Mate 40 / Mate 40 Pro / Mate 40 Pro+ / Mate 40 RS Porsche Design (88° Horizon Display)
• Mate 50 Pro / Mate 50 RS Porsche Design
• Mate 60 Pro / Mate 60 Pro+ / Mate 60 RS ULTIMATE DESIGN (quad-curved)
• Mate 70 Pro / Mate 70 Pro+ / Mate 70 RS ULTIMATE DESIGN
• Mate 80 Pro / Mate 80 Pro Max / Mate 80 RS ULTIMATE DESIGN

Huawei P / Pura series (from P40)

• P40 Pro / P40 Pro+ (Quad-Curve Overflow Display)
• P50 Pro
• P60 Pro / P60 Art (quad-curved)
• Pura 70 Pro / Pura 70 Pro+ / Pura 70 Ultra (quad-curved, equal depth)
• Pura 80 Pro / Pura 80 Pro+ / Pura 80 Ultra (quad-curved, equal depth)

Honor Magic series

• Magic3 / Magic3 Pro / Magic3 Ultimate
• Magic4 / Magic4 Pro / Magic4 Ultimate
• Magic5 / Magic5 Pro / Magic5 Ultimate
• Magic6 / Magic6 Pro / Magic6 Ultimate
• Magic7 / Magic7 Pro / Magic7 RSR Porsche Design
• Magic8 Pro / Magic8 Pro Air
• Magic8 RSR Porsche Design

Honor number series

• Honor 50 Pro / 60 Pro / 70 Pro / 80 Pro
• Honor 90 Pro / 100 Pro / 200 Pro / 300 Pro
• Honor 300 Ultra / 400 Pro
• Honor 70 / 80 / 200 (curved-screen versions)

Honor X series (curved models)

• Honor X50
• Honor X60 Pro

Not covered: Samsung Galaxy S8 and earlier, Galaxy Note8 and earlier; Huawei Mate 30 and earlier, P30 and earlier; the Huawei nova series; and the flat-screen versions of the models listed above (for example the standard Mate 80 or standard Magic8).

Specifications

Product name	kmore 3D Curved Full-Glue Tempered Glass (Samsung / Huawei / Honor curved screens)
Model code	KM-3D-FULLGLUE
Core features	3D hot-bent curve / true full-adhesive bonding with no white edges / ultrasonic fingerprint compatible / electroplated oleophobic coating / 9H hardness
Brand compatibility	Samsung / Huawei / Honor
Model coverage	Samsung Galaxy from S9 / Note9; Huawei from Mate 40 / P40; Honor Magic, number and X series curved models (full list above)
Material & process	High-alumina silicate glass + 3D hot bending
Bonding	Full-surface adhesive (not edge adhesive)
Cutouts	None — no earpiece or camera cutout
Fingerprint	Supports under-display ultrasonic fingerprint unlock (re-register your fingerprint once after application)
Hardness	9H (scratch resistant, wear resistant)
Light transmittance	≥90% (HD, high clarity)
Coating	Electroplated oleophobic layer, water contact angle >115° (anti-fingerprint, anti-oil)
In the box	3D curved full-glue tempered glass ×1; application accessories (dust-removal sticker / cleaning cloth / squeegee) configured to order
Packaging	Custom color boxes, OPP bags or dust-free applicator kits to order
MOQ / Lead time	OEM/ODM supported — contact us for MOQ and lead time

How to Apply (Essential for Curved Full-Adhesive Film)

• Deep clean — the curved edge traps dust easily, so press the dust-removal sticker repeatedly all round the screen. This is the key to avoiding bubbles.
• Position precisely — use the alignment tool, or align the top edge and earpiece first, then lower the film slowly.
• Let gravity do the work — full-adhesive film has a softer adhesive layer; don’t press hard in the middle after lowering. Let it release air under its own weight, and push out any remaining bubbles gently from the centre outwards with the squeegee and cloth.
• Press the edges — where the edge floats slightly, press gently along the curved edge with your fingertip for a few seconds so body warmth helps the adhesive settle.

In Real Use